@PeterGoodhew wrote:
I'm getting meridian flip failures as per this log extract. Any idea why? Can supply full log if needed.
[08/14/17 01:16:47.630][DEBUG] [Telescope Thread] Scope solve complete...
[08/14/17 01:16:47.630][DEBUG] [Telescope Thread] SGM_TELESCOPE_SOLVE message complete...
[08/14/17 01:16:47.648][DEBUG] [Pier Flip Thread] Meridian flip: Scope solve complete...
[08/14/17 01:16:47.648][DEBUG] [Pier Flip Thread] Meridian Flip: Solve was Successful
[08/14/17 01:16:47.648][DEBUG] [Pier Flip Thread] Meridian Flip: Stopping the Auto Guider
[08/14/17 01:16:47.649][DEBUG] [Pier Flip Thread] Meridian Flip: Sending Telescope command to execute meridian flip
[08/14/17 01:16:47.739][DEBUG] [Telescope Thread] ASCOM Telescope: Pier side is West
[08/14/17 01:16:47.739][DEBUG] [Telescope Thread] ASCOM Telescope: attempting pier flip using sideOfPier
[08/14/17 01:16:48.578][DEBUG] [Telescope Thread] Setting Pier East
[08/14/17 01:16:48.737][DEBUG] [Telescope Thread] Pier Flip failed when using side of pier: System.Exception: Flip requested but cannot be done at present position.
[08/14/17 01:17:19.477][DEBUG] [Telescope Thread] ASCOM Telescope: Failed to flip because starting pier side and ending pier side are the same!
[08/14/17 01:17:20.502][DEBUG] [Pier Flip Thread] Meridian Flip: Telescope command to meridian flip has completed
[08/14/17 01:17:20.502][DEBUG] [Pier Flip Thread] Meridian Flip: Telescope failed to perform meridian flip
[08/14/17 01:17:24.962][DEBUG] [Pier Flip Thread] Meridian Flip: Procedure complete
[08/14/17 01:17:36.172][DEBUG] [Sequence Thread] Blocking Pier Flip: Failed to meridian flip, aborting sequence (False)
[08/14/17 01:17:36.172][DEBUG] [Sequence Thread] Adding sequence level notification: Failed to meridian flip, aborting sequence.
Posts: 3
Participants: 2