Can't Get ANSVR to Blind Solve - "Can't Set Up Server"
@WayneH wrote: Images will solve on remote Astronometry site but not my local machine. It runs for a couple minutes and says can’t solve. i look at the ansvr log and it says basically “can’t set up...
View ArticleClik here to view.
Plate Solve stopped working abruptly
@jinzai wrote: Plate solve has become unavailable on my system. I was using images taken with SharpCap and opening them from the Plate Solve dialog and entering the proper scale and approximate...
View ArticleFlip Problem
@RAPALA wrote: Hello, The last week end I have with the Flip when the mount arrive at the meridian. SGP display many message I not understand and after the option flip turn off. I have Celestron AVX...
View ArticleVery slow download canon t6i
@ehorton wrote: I know this has been discussed several times in the past but did not find anything that actually helped. I’m running a Canon t6i and have consistently been getting download times that...
View ArticleEnhancing focuser management
@chasmiller46 wrote: As part of the on-going feature enhancements for v3, I would like to see SGP provide more control of the focuser to include management of the temperature compensation option and...
View ArticleRotator config in SGP
@ve1drg wrote: The configuration has a position for a rotator. Do I have to use that position. What is it meant to be there for? I have a telescope/camera that sits on a nice mount. And it turns well...
View ArticleFile Naming Pattern Addition
@RobinBrown wrote: Hi SGPro Team, My version SGPro is 2.6.0.25 and works without any issue. As I am just starting to get into the mosaics I come across a stumbling block with the file naming Pattern...
View ArticleFlat Box Not Dimming Correctly
@MLewis wrote: I’m setting up my imaging system for capturing flats. I am using my TEC 140 with TEC field flattener and my QSI 683. Eventually I will also use an Astro-Physics Quad Telecompressor...
View ArticleDithering Help - Both Axis?
@GeneralT001 wrote: Hi, Should I be dithering both axis or just one? Posts: 1 Participants: 1 Read full topic
View ArticleSGP 3.0.1.0 Stopped working
@DaveNZ wrote: SGP has been working well until I tried connected to my QSI683 camera that wasnt attached to my laptop (it was late at night). SPG went away into never never land so I hard booted the...
View ArticleLX600 WILL plate solve!
@AF7JQ wrote: Finally! LX600 will plate solve using POTH and the LX200GPS driver. Use POTH as the telescope driver, then enter lx200gps as the telescope driver in POTH. You will still get the firmware...
View ArticleClik here to view.
It's galaxy season! M96 and Leo Triplet
@joelshort wrote: Over a year ago I put money down for a CFF 10" RC specifically to give me more focal length for capturing galaxies, which I find to be MUCH harder than nebulae. This is the first...
View ArticleStuck in download for longer exposures zwo 071
@evan wrote: I have been taking shorter 2 min exposures with no download problems. When I now wish to take 5 min exposures on my zwo 071 I get stuck in download. What gives. I am on trial and about to...
View ArticleASI1600 camera add gain to file name
@alcol wrote: As I understand it Gain can be added to the file name using “%cg” ? I have added this but in the file name of the images it comes up as “NAcg” As gain for the ASI1600 camera is set in...
View ArticleClik here to view.
PHD2 Guiding Assistant automation?
@rottielover wrote: I have a question about SGP’s interface with PHD2. I know that in SGP you can force PHD2 to recalibrate for each target (PHD2’s documentation and forums seem to discourage this...
View ArticleSGP not parking dome correctly
@Xplode wrote: I’m working on the setup of a dome observatory and found some weird behaviour by SGP where it tells the dome to park (to the correct position), parks the mount, after that it starts...
View ArticleTarget Area Not Correct in Framing/Mosaic Wizard
@Loper82 wrote: Admittedly I am new to SGP, so please bear with me. I have set my camera up ASI1600MM-Cool, everything has been very straight forward but I cannot get a correct Target Area to appear....
View Article%cg in file name not working for ZWO
@WayneH wrote: I’m trying to put camera gain in the file name template but I get a NAcg instead of the number. I’m using %cg as the placeholder. Posts: 1 Participants: 1 Read full topic
View ArticleCustomer service don’t answer!
@Rafaro wrote: I sent two emails to customer service about prices Of 3.0 version having payed the before versión 1 month before, and i haven’t answer… Posts: 1 Participants: 1 Read full topic
View ArticleMeridian Flip Failure after recentering
@Ian_G wrote: I’ve been using SGPro for a while now with great success. It does Meridian Flips pretty reliably too. However, sometimes it would fail. It does the Flip, Plate Solves fine. Then, it...
View Article
