Clik here to view.
Planning Tools Release Candidate
@Ken wrote: Here is the official release candidate for the planning and altitude tool set: image.png1696x902 337 KB Click the image to see the full UI New: Altitude lock: The red arrow shows the UI...
View ArticleSnapCap pre and post events
@Gordb wrote: I'm not sure if this is on the horizon for SnapCap but it would be nice to include pre and post event options for SnapCap. With the SnapCap closed it could be set to open prior to a...
View ArticlePHD guiding issues soon after sequence start
@Matthew_Davenport wrote: Soon after i start a sequence with sg pro, the auto guider resumes. about 20 seconds later though, both the ra and dec run way off the graph and the guide image streaks, like...
View ArticleDSLR Built-in WiFi
@Farzad_k wrote: Hello, In trying to find a better alternative to tethering I am thinking if the WiFi capabiity of the camera cannot be used for communication between SGP and the camera. Has any...
View ArticleWhere did we get to on telescope sync alternatives?
@buzz wrote: @Ken Ken, when I was recording the SGP videos I was trying to recall the differences between the sync alternatives on the telescope tab. I did a search on the two offsets through the...
View ArticleNotifications issues on Android Phone - GNS and Gmail
@CCDMan wrote: I used to use GNS with my Android phone on the local network and had no issues. For the last 6 months or so I have not been able to get it to talk to my phone (coms error). This is with...
View ArticleCelestron Nightscape CCD failing to connect
@DeanAshton wrote: When trying to connect to a Celestron Nightscape I get the connection error message: "Error connecting to Celestron Nightscape! Retrieving the COM class factory for component with...
View ArticleSGpro causing PHD2 to crash, I think
@mahaffm wrote: I'm not sure where to post this, SGPro or PHD2, so I’ll start here. For my normal imaging workflow I typically have the mount ready, SGPro running and ready to start, (sequence loaded...
View ArticleSGP 2.6.0.24 just stopped working on my Windows 10 machine
@Robert_Kimball wrote: For some reason, SGP 2.6.0.24 has stopped opening on my Windows 10 machine. Went back to 2.6.0.23 and all works. Just interested in seeing if this has happened to anyone else. I...
View ArticleMultiple Camera Support
@jimgrubb wrote: Is there any news on multiple camera support? I'm currently running dual AP Travlers with dual ZWO ASI 1600 cameras and filter wheels. I have had minor success with running dual...
View ArticleCould "Stop Tracking after Park" be optional?
@gboulton wrote: Hey gang, Recently encountered a new issue w/ SGP 2.6.0.24 and my AP Mach1-GTO w/ CP4. After a session completes, and SGP parks the mount, the mount goes to its park position, reports...
View ArticleCanon 80D supported?
@Gunny01 wrote: Is the canon 80d supported in SGP? Posts: 1 Participants: 1 Read full topic
View ArticleUser Action Required Warning
@JanP wrote: Greetings, Last night was my first experience using SGPro. For the sequence I set both a start and end time, calculating "about when" the image capture process would be through. I went to...
View ArticleFocuser recomendation
@astromaphilli14 wrote: I 'was' a proud owner (it's broken) of a NGF-XTnM with all the bells and whistles, HC, PC Control, DRO, Smart Focus etc. It was great in FireCapture and stand alone PC control....
View ArticleClik here to view.
"Get Current Position" Button
@hamiland wrote: Hi, I'm wondering if it would be possible to add a button in the Target Settings window to get the Mount's Current reported position for ad-hoc mobile imaging. My logic behind this...
View ArticleUpdating a library of sequences?
@Ron_Kramer wrote: Hoping theres a easy way. Ok - I setup equipment and give it a name. (I use same all the time). I create a dozen sequences (per target name and save them as per target name). I now...
View ArticleWhats the -1 all about wrt AF Step Size Calculation?
@GeneralT001 wrote: Hi, According to the help file you use the following to determine an ideal step size for AF: (in focus position - out focus position) x 2 then divide this number by the data steps...
View ArticleQuestion about SGP and the use of Altinak emu
@warbird wrote: I use Altinak emu to control my spike-a-flat panel. After doing my flat sequence (Different setting for each of my filter), the panel won't turn it off at the end of the sequence. SGP...
View ArticleCould “Stop Tracking after Failed PlateSolve” be optional?
@Tellescopio_Acessori wrote: Last night I record a sequence on SGP to start to capture a galaxy at 02:00am, but the platesolving failed and my mount keeps traking over all night until hits on tripod...
View ArticleAny way to apply Flats exposures without re-running the Wizard?
@xiga wrote: Hi guys I recently re-ran the Flats Calibration Wizard (due to a slight change in my equipment) and I did so by connecting my Nikon D5300 to my home desktop computer, which has SGP on it....
View Article