Sequence initiation requires image size
@LunamS wrote: I am a newbe. I am trying to image a specified target using a nikkn d7000 with a 50mm lens on ioptron 45 eq mount. I want the sequence to begin and end at specified time. But when i try...
View ArticleHow to bypass "analyzing star data" in frame and focus?
@rgbtxus wrote: I suspect I have just overlooked how to do this, but it is quite annoying. I use a flats panel with a intensity setting that cannot be set precisely at all. As a result when I take...
View ArticleConfused as usual
@jimdrever wrote: Hello allSGP will solve an image of m 42 in about 5 seconds. I took the image using Maxim dl.I took an image last night captured with SGP, same settings and it won't solve.Any hints...
View ArticleMeridian Flip Problems w/Beta 2.6.0.8
@rjbokleman wrote: I've been having Meridian flip issues with my iEQ45 Pro for some time now w/the beta releases. Just getting around to reporting it. When the release notes for 2.6.0.8 mentioned...
View Article"Decrement event count?" not visible in newly acquired frames
@vehnae wrote: Hello, I wonder why SGP doesn't display the "Decrement the event captured count" checkbox in the dialog when I mark a newly acquired image as bad? If I use the arrow buttons to go to a...
View ArticleClik here to view.
Telescope does not slew with SGP
@LunamS wrote: I was trying to use SGP to run a sequence last night but it failed (I am including the log file)I use an Ioptrom IEQ 45 with ascom driver.SGP does recognize the mount and starts the...
View ArticleASCOM and multithreading
@Horia wrote: Hi Ken, Hi Jared, I am playing with an ASCOM focuser driver I wrote, as the “official” one I am using right now is not very stable (it freezes every now and then, sometimes for some...
View ArticleMoonlite controller connection problem
@pfile wrote: though i suspect this does not have to do with SGP, i wonder if someone here has seen this: i just got a new moonlite controller for a 2nd system. when i hooked it up, it appeared at...
View ArticleMoonlite focuser question
@toml wrote: Odd problem started recently. Using 2.5.xxx. My count range is approx. 9000 but when I turned it on a few weeks ago it showed 15305. I lowered it by uncoupling the stepper and it worked...
View ArticleBugs in the latest version (and in beta too)
@Moonboy wrote: I use sequence generator pro the frist time and its a great tool. I was searching for a tool like that for years.I only know MaximDL which has some more features and another price. But...
View ArticleClik here to view.
Meridian Flip Fail with Paramount MX+
@Steveinfl wrote: Having a problem executing an auto meridian flip. I am running the latest version of SGP and the latest Daily Build (10.5.0) of The SkyX with my MX+. It seems that SGP sends a slew...
View ArticleQuick SGP Tutorials
@Jared wrote: I'm planning on making some short (5 minute) video tutorials for SGP that are focused on accomplishing a particular task. For instance "How to I determine auto focus settings?". What...
View ArticleMin star size during autofocus in 2.6.0.10?
@pfile wrote: i accidentally tried to run auto-focus with my camera cooler turned off. i found that SGP was detecting hot pixels as stars and was unable to complete an autofocus run. i thought the...
View ArticleClik here to view.
Mosaics captured with ASI1600MMC and SGPro
@Gucky wrote: Hi fellow astrophotographersduring the last months I have taken some mosaics. As it turned out the "Framing & Mosaic Wizard" is well worth its price!I started with a 8 panel mosaic...
View ArticleCone nebula 10hr 20min at f2.3 HaRGB
@Alfredo_Beltran wrote: Hi I want to share with you all this HaRGB version of the Cone Nebula. It is te result of 4hr 30 min RGB and 5 hr 50 min in Ha, for a total integration time of 10 hr 20 min....
View ArticleTarget Pointing using SG Pro
@Rajib wrote: After a good polar alignment, is it possible that SGPro will slew the scope to the desired target? Or, is the scope initially required to be roughly pointed to the target after Polar...
View ArticleTarget End Time Change Commit on OK
@RomanFyseek wrote: The other night, I was imaging and realized that I would have an additional two hours before my target would move into the trees so, I opened up the target window and changed the...
View ArticlePointing / Sync Offset
@ribuck wrote: Hi All, In the past i've noticed a few posts in regards to improving pointing accuracy, and i think i recall seeing several references to "Offsets". Can somenone please explain what...
View ArticleAnyone using ASCOM 6.3 with SGP?
@topboxman wrote: I noticed ASCOM 6.3 is ready and was wondering if anyone is using this version with latest SGP? Any issue we should know about? Thanks,Peter Posts: 1 Participants: 1 Read full topic
View ArticleSequence Window Layout Problem
@DesertSky wrote: I just tried the 2.6.0.10 beta and I found that the sequence window has some layout issues. The columns do not lineup with the column headers and the two buttons on the bottom of the...
View Article